Automated Cells & Equipment, Inc.
FANUC Robotics Certified Servicing Integrator

News Articles

Fun Facts About Fanuc Robotics

FANUC Robotics' not only makes a great robot, but they also have some great history. Did you know ...

  • 1972 - FANUC became an independent company from its parent Fujitsu.
  • 1982 - With a $10 million investment from General Motors Corporation and FANUC LTD, GMFanuc Robotics Corporation was established in June of 1982. A staff of 70 started work at the GM Technical Center in Warren, Michigan and later that year relocated to a 50,000-square-foot facility in Troy, Michigan. The first customer installation consisted of a 10-robot paint line located at the GM assembly plant in Doraville, Georgia.
  • 1992 - General Motors Corporation sold its 50-percent ownership in GMF Robotics to FANUC LTD, who then created two subsidiaries FANUC Robotics North America, Inc. and FANUC Robotics Europe GmbH. It was noted during the signing ceremony that over one half of the original executive staff was left handed.
  • 1998 - FANUC Robotics achieved ISO 9001:1994/QS-9000 certification.
  • 2008 - FANUC M-430iA robot achieves USDA acceptance. It was the first and only robot to meet hygiene requirements for meat and poultry processing and received acceptance from the United States Department of Agriculture.
  • 2009 - FANUC Robotics had a starring role in assembling an army of Terminators in Warner Brothers’ Terminator Salvation. Also, the FANUC M-2000iA/1200 was introduced. This robot had a1350kg payload and promoted the highest payload and the strongest wrist in the industry, when compared to other six-axis robots.
  • 2010 - FANUC Robotics was featured on Modern Marvel’s “Top Ten Technological Innovations of the Last Generation.”


FANUC Japan Headquarters Mount Fuji

Other Fun Facts about FANUC Robotics

  • FANUC headquarters is located in its own forest of 1.5 million square meters located at the foot of Mt. Fuji.
  • FANUC is vertically integrated and makes its own encoders, servo amps, CPU's, enclosures, robots and machine tools including: RoboShot, RoboDrill and RobotCut.
  • FANUC is most famous for its servo motors. In fact, they manufacture over 1 million servo motors per year.
  • FANUC provides more than 50% of all CNC controls and motors to the machine tool industry worldwide.

For more information visit: Some of the above information can also be found at








 Printer Friendly   Email A Friend   

FANUC America Service and Vision Provider


 Robotics Industries Association

 Association for Manufacturing Technology

 Metal Powder Industries Federation


Automated Cells & Equipment Facility

Automated Cells & Equipment, Inc.
9699 Enterprise Drive
Painted Post, NY 14870
Phone: 607.936.1341 Fax: 607.936.1531

©2018 Automated Cells & Equipment. All Rights Reserved.
Website Design by inCommand Technologies, Inc.